Aluminum Adjustable Trigger Install Manual

Aluminum Adjustable Trigger For TM Glock Install Manual

1，Disassemble original TM Glock，Until you pull out the original trigger and trigger bar.

2，Choose your favour color of trigger and safety.Take out the necessary parts(include：trigger 、safety、safety spring、washer、m2*8 screw、m4*4 screw）

3，Put the safety spring as the pic shows.

4，Put the safety with safety spring and install the first m2*8 screw.

5，

7，Install the second m2*8 screw.

8，Install the M4*4 screw, just the same level with the trigger surface.

9，Re-install all the parts as original.

10，Pull the trigger , and tight the M4*4 screw as below.

11，Try to press down the trigger bar ,let the hammer lock down.

If the hammer lock down normally , then you can still tight the m4*4

screw ,until the hammer couldn't lock down.Then un-tight the screw.

12，Mark this place , this is the "Workable Shortest trigger pull".

13，After that, your glock can work with in the original trigger pull range

and the shortest pull range.